济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06
人 气:820
铜板铝板切割-01
人 气:431
激光切割加工-02
人 气:4132
您现在的位置:主页 > 新闻中心 > 常见问答 >

济南激光切割的工作方式是什么?

发表时间:2017-06-17 09:37  责任编辑:大宝娱乐_大宝娱乐lg_大宝lg娱乐官网  点击:
  济南激光切割加工自动门工作原理,自动门的原理与自动门机的基本组成大体上相同,有了以上构成,再加上开门信号,就可以配置成一套简单的自动门系统了。自动门的系统配置是指根据使用要求而配备的,与自动门控制器相连的外围辅助控制装置,如开门信号源、门禁系统、安全装置、集中控制等。   The processing principle of automatic door Ji'nan laser cutting, the basic composition and principle of automatic door automatic door machine is roughly the same, with the above, plus the gate signal can be configured into a set of simple automatic door system. Automatic door system configuration refers to the use of requirements and equipped with automatic door controller connected to the peripheral auxiliary control devices, such as door signal source, access control system, security devices, centralized control.   传动机构可以是齿轮传动、链条传动,也可以是高效率的同步带川传动。控制和传感器检测装置控制器是由一个微型计算机为主体的控制装置,它接受检测传感器的信号,让驱动装置工作,完成门体的启闭。传感器是自动检测人体或通过人工操作将检测信号传递到控制器的器件或装置。激光切割加工门的启闭机械化、自动化,运行安全可靠。门的启闭实现了电机驱动,大大减轻了出入门的劳动强度和通行效率。由于采用了的控制技术和安全保护措施,使出入自动门更加安全可靠。门的密闭性能和节省能源的性能。自动旋转门无论转到哪个位置对门外都是敞开的,对门内都是关闭的,因此能减少热量损失,减少尘土的侵入,增加了密闭性,节省了能源。   The transmission mechanism can be a gear drive, a chain drive, or an efficient synchronous belt drive. The controller is a control device with a microcomputer as its main body. It accepts the signal of the sensor and makes the actuating device work to complete the headstock. A sensor is a device or device that detects the human body automatically or passes the detected signal to the controller through manual operation. Laser cutting door opening and closing mechanization and automation, safe and reliable operation. The opening and closing of the door realizes the motor drive, greatly reducing the labor intensity and the efficiency of the entrance. Due to the adoption of advanced control technology and safety measures, the automatic door is safer and more reliable. The hermetic performance of doors and the energy saving performance. The automatic revolving door is open to the door no matter which location is turned on, and the door is closed inside, so the heat loss can be reduced, the invasion of dust is reduced, the tightness is increased, and the energy is saved.
同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程
getianmold.com大宝娱乐的SEO综合查询 - 站长工具