济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06
人 气:820
铜板铝板切割-01
人 气:431
激光切割加工-02
人 气:4132
您现在的位置:主页 > 新闻中心 > 常见问答 >

激光切割加工时应该注意哪些细节?

发表时间:2017-06-23 15:12  责任编辑:大宝娱乐_大宝娱乐lg_大宝lg娱乐官网  点击:
  济南激光切割加工是一件很精密的工作,所以在工作中就需要我们非常的细心必须要注意好一些细节,那么下面我们就来说一说应该注意哪些问题:   Ji'nan laser cutting is a very delicate work, so in the work we need to be very careful, we must pay attention to some details, then we will talk about what should pay attention to:   要在有交点的当地进行检查,在进行激光切割曾经要先对资料的光束点进行调理,因为激光束一般是看不见的,所以可以用楔形丙烯块来对其进行检查。还要对他进行穿孔,如果说你的件他是要在资料里边进行切开的,那就要先在资料上把孔打好。   To check in the local node, conditioning in laser cutting had to beam data, because the laser beam is usually invisible, so you can use a wedge block to check on the propylene. To punch him, and if your part is to be cut in the data, you have to hit the hole in the data first.   一般会用连续的激光,如果说你要在对比薄的板上进行穿孔,那会借助于气体的压力。要是这个件他对比的厚,那也可以用气体的压力来进行穿孔,可是他很简单会在件的外表留下溶坑,这就对切开质量造成了影响,当气流变大的时分他还会让切开的速度降低。还要防止让工件呈现烧熔的状况,要是咱们没有合理的对切开的数据进行设置亦或是在运用的时分不留心那就很可能会呈现这种状况。   A continuous laser is usually used, and if you want to punch a thin plate, it is under the pressure of the gas. If the parts he compared thick, it can also use the gas pressure to perforation, but he is very simple left soluble pit in the part of the appearance, the quality of incision impact, when he will let the big gas flow and reduce the rate of. It is also possible to prevent the workpiece from melting and fusing. If we do not have reasonable data for the incision, or when we do not pay attention to the use, it is likely to present this situation.
同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程
getianmold.com大宝娱乐的SEO综合查询 - 站长工具