济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛

全国服务热线13335166268
0531-88602386
推荐产品
钣金加工-06
人 气:820
铜板铝板切割-01
人 气:431
激光切割加工-02
人 气:4132
您现在的位置:主页 > 新闻中心 > 常见问答 >

怎么安装激光切割机镜片?

发表时间:2017-06-30 10:01  责任编辑:大宝娱乐_大宝娱乐lg_大宝lg娱乐官网  点击:
  割中心偏差甚或切割机沟边错位。   The laser is a high precision machinery and equipment, in the process of using more stringent requirements, a key component of the skill about laser cutting accuracy is the lens cutting machine installation, the parts if not in accordance with the provisions of the procedures for installation is very easy to cause the cutting center deviation or cutting machine edge dislocation.   1、操作前请将手清洗干净,好用肥皂或者清洁剂清洗双手,这个是正常操作切割机镜头的良好习惯。切勿直接使用裸手接触镜片,应带上专用的手套操作,防止手指印留在镜头上影响精确度。   1. Clean your hands before operation. Wash your hands with soap or detergent. This is a good habit to operate the cutting machine lens properly. Do not use naked hand contact lenses directly. Special gloves should be provided to prevent finger prints from affecting the accuracy of the lens.   2、镜头置放的时候应注意平稳以免滑落摔坏,同时注意镜头的凸面朝上的平放在平稳干净的桌面上。同时注意检查桌面无杂物,以免混乱或者影响镜头的操作环境。   2, when the lens is placed, should pay attention to smooth, so as not to slip, break, and pay attention to the convex surface of the lens, flat on the smooth and clean desktop. At the same time, pay attention to check the desktop without debris, so as not to mess or affect the operating environment of the lens.   3、切割机镜头慎防潮湿,也不能使用传统吹气的方式拭擦镜头,更不能使用热气同对镜头吹起,以免受热骤变而破坏镜头。镜头属于高精密的一起,温湿度受到严格的控制,以免影响镜头表面保护膜和光学精度。   3, beware of the lens cutting machine wet, also cannot use the traditional way of blowing wipe the lens, but can not use the same lens on the hot air blowing, so as to avoid the sudden destruction of lens heating. The lenses are of high precision, and the temperature and humidity are tightly controlled so as not to affect the protective film and optical accuracy of the lens surface.   4、激光切割机镜片组装好后注意镜片的清洁和去尘,好使用净空气喷枪清洁,勿用普通的喷枪。   4, laser cutting machine lens after assembling the lens cleaning and pay attention to dust, it is best to use the clean air gun cleaning, do not use ordinary gun.   5、切割机镜头须保持的干净,且莫用手直接摸镜头表面,也严格防止其他非指定物品直接接触镜头表面。在镜头的清洗保养中应用专业的拭擦纸轻轻从侧边往另一边慢慢拉动,以免刮花镜头表面。   5, the lens cutting machine should be kept absolutely clean, do not use hand directly touch the surface of the lens, but also strictly prevent other non designated goods in direct contact with the surface of the lens. The application of professional paper wipe gently from the side to the other side of the lens slowly pull the cleaning and maintenance in order to avoid scratching the surface of the lens.
同类文章:
  • 济南激光切割加工_山东激光切割加工_济南镀钛_山东不锈钢镀钛_济南不锈钢工程
getianmold.com大宝娱乐的SEO综合查询 - 站长工具